Novinky od ruznych vyrobcu...
- Madmessy
- Příspěvky: 2877
- Registrován: 02 říj 2012, 21:39
- Bydliště: Praha,srdcem však Sudety
- Kontaktovat uživatele:
Re: Novinky od ruznych vyrobcu...
Zukei Mura vyprskla Gčko a teď i Meng. Řekl bych,že tu někomu bude cukat jedno oko
Russian warship,go FUCK yourself!!!
- sobi
- Příspěvky: 1064
- Registrován: 16 dub 2014, 15:06
- Bydliště: Hosterschlag
Re: Novinky od ruznych vyrobcu...
Lasička pěkná
-
- Příspěvky: 59
- Registrován: 23 úno 2013, 20:37
- herr66
- Příspěvky: 4419
- Registrován: 12 dub 2012, 09:03
- Kontaktovat uživatele:
Re: Novinky od ruznych vyrobcu...
Krasnej urcite, ale bude to velky, jako krava…
- boticka5
- Příspěvky: 69
- Registrován: 15 bře 2018, 22:02
Re: Novinky od ruznych vyrobcu...
Je to veliký mám pocit že průměr rotoru je 67cm a cena začíná na 3600 nebo tak nějak. Hrůza pořád se rozmyslím zda za ty peníze do něho skočit nebo ne
Odesláno z mého Redmi Note 9 Pro pomocí Tapatalk
Odesláno z mého Redmi Note 9 Pro pomocí Tapatalk
- Tango
- Příspěvky: 55
- Registrován: 18 čer 2013, 21:12
- Bydliště: Liberec
Re: Novinky od ruznych vyrobcu...
Novinky Armycast
Resinové sady:
- 1/72 P-38J/L ovládací plochy (ACA)
- 1/72 P-38L - konverze pro P-38J (ACA)
- 1/72 H. Hurricane ovládací plochy (Arma)
Nové obtisky:
- 1/72 Hongdu K-8 Karakorum (Trumpeter)
- 1/72 Israeli Phantoms (HAS)
- 1/48 Israeli Phantoms (HAS/Meng) Do sad jsme zařadili filmový marking Phantoma no.309 který si zahrál sovětského MiGa v klasice,
kterou většina z nás starších zná z VHS - Iron Eagle II
Resinové sady:
- 1/72 P-38J/L ovládací plochy (ACA)
- 1/72 P-38L - konverze pro P-38J (ACA)
- 1/72 H. Hurricane ovládací plochy (Arma)
Nové obtisky:
- 1/72 Hongdu K-8 Karakorum (Trumpeter)
- 1/72 Israeli Phantoms (HAS)
- 1/48 Israeli Phantoms (HAS/Meng) Do sad jsme zařadili filmový marking Phantoma no.309 který si zahrál sovětského MiGa v klasice,
kterou většina z nás starších zná z VHS - Iron Eagle II
-
- Příspěvky: 59
- Registrován: 23 úno 2013, 20:37
Re: Novinky od ruznych vyrobcu...
Firma Reskit dnes na FB vydala svoj program na ďalších šesť mesiacov:
1/48
MJ-1 "Jammer" loader (3D Printed) (1/48)
MJ-1A "Jammer" loader (3D Printed) (1/48)
MJ-1B "Jammer" loader (3D Printed) (1/48)
MJ-1B-C "Jammer" loader (3D Printed) (1/48)
MJ-1C "Jammer" loader (3D Printed) (1/48)
A-7E "Corsair II" air intakes, wheel bays, landing gears, wheels for Hasegawa kit (3D Printed) (1/48)
A-7D "Corsair II" air intakes, wheel bays, landing gears, wheels for Hasegawa kit (3D Printed) (1/48)
A-7E "Corsair II" air intakes, wheel bays, landing gears, wheels HobbyBoss kit (3D Printed) (1/48)
A-7D "Corsair II" air intakes, wheel bays, landing gears, wheels for HobbyBoss kit (3D Printed) (1/48)
F-111 Triple Plow I Air Intakes for HobbyBoss Kit (3D Printed) (1/48)
F-111 Triple Plow II Air Intakes for HobbyBoss Kit (3D Printed) (1/48)
F-111 Triple Plow I Air Intakes for Academy Kit (3D Printed) (1/48)
F-111 Triple Plow II Air Intakes for Academy Kit (3D Printed) (1/48)
F-111 wheel bay with landing gear for HobbyBoss Kit (3D Printed) (1/48)
F-111 wheel bay with landing gear for Academy Kit (3D Printed) (1/48)
F-111 Bomb bay for HobbyBoss Kit (3D Printed) (1/48)
F-111 Bomb bay for Academy Kit (3D Printed) (1/48)
USAF Outboard pylon for F-4 "Phantom II" C/D/E/G (1/48)
NAVY Outboard pylon for F-4 "Phantom II" B/J/N/S (1/48)
F/A-18 (A/B/C/D) air intakes for Kinetick kit (3D Printed) (1/48)
F/A-18 (A/B/C/D) air intakes for Hasegawa kit (3D Printed) (1/48)
T-38A "Talon" exhaust nozzles for Wolfpack kit (3D Printed) (1/48)
T-38C "Talon ll" exhaust nozzles for Wolfpack kit (3D Printed) (1/48)
Rafale C cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale B cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale M cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale B cockpit with 3D decals for HobbyBoss kit (1/48)
Rafale M cockpit with 3D decals for HobbyBoss kit (1/48)
Rafale C cockpit with 3D decals for HobbyBoss kit (1/48)
A-7E "Corsair II" Cockpit for Hasegawa kit (1/48)
A-7D "Corsair II" Cockpit for Hasegawa kit (1/48)
A-7E "Corsair II" Cockpit for HobbyBoss kit (1/48)
A-7D "Corsair II" Cockpit for HobbyBoss kit (1/48)
F-105 "Thunderchief" Air intakes for Hobby Boss kit (3d Printed) (1/48)
F-105D "Thunderchief" cockpit with 3D decals for Hobby Boss kit (3d Printed) (1/48)
F-105G "Thunderchief" cockpit with 3D decals for Hobby Boss kit (3d Printed) (1/48)
OV-10 (A/C) "Bronco" Cockpit, landing gears, wheels bay and weighted wheels set for ICM kit (3d Printed) (1/48)
OV-10 (D) "Bronco" Cockpit, landing gears, wheels bay and weighted wheels set for ICM kit (3d Printed) (1/48)
OV-10 "Bronco" cargo bay for ICM kit (3d Printed) (1/48)
F/A-18 "Hornet" landing gears with weighted wheels set for Kinetic kit (3D printed) (1/48)
F/A-18 "Hornet" landing gears with weighted wheels set for Hasegawa kit (3D printed) (1/48)
F/A-18 "Hornet" wheels bays for Kinetic kit (3D printed) (1/48)
F/A-18 "Hornet" wheels bays for Hasegawa kit (3D printed) (1/48)
AGM-12B Bullpup-A missiles (2 pcs) (A-4, A-5, A-6, A-7, F-4, F-8, F-100, F-105, P-3 Orion, Sea Vixen, Buccaneer) (1/48)
AGM-12C Bullpup-B missiles (2 pcs) (A-4, A-5, A-6, A-7, F-4, F-8, F-100, F-105, P-3 Orion, Sea Vixen, Buccaneer) (1/48)
F-15 (C/D) "Eagle" late (since 2017 - US only) wheels set (weighted) (1/48)
F-4 "Phantom II" late 370 gallon fuel tanks with pylons (2 pcs) (1/48) (Royal Jet)
F-4 "Phantom II" early 600 gallon fuel tank with pylons (2 pcs) (1/48)
Sea King tail rotor for Airfix kit (3D printed) (1/48)
Sea King folding tail for HAS.1/HAS.5/HU.5 for Airfix kit (3D printed) (1/48)
Sea King folded main rotor with blade fold restraint systems for Airfix kit (3D printed) (1/48)
Sea King unfolded main rotor for Airfix kit (3D printed) (1/48)
Sea King tail rotor for Hasegawa kit (3D printed) (1/48)
Sea King folding tail for Hasegawa kit (3D printed) (1/48)
Sea King folded main rotor with blade fold restraint systems for Hasegawa kit (3D printed) (1/48)
Sea King unfolded main rotor for Hasegawa kit (3D printed) (1/48)
1/48
MJ-1 "Jammer" loader (3D Printed) (1/48)
MJ-1A "Jammer" loader (3D Printed) (1/48)
MJ-1B "Jammer" loader (3D Printed) (1/48)
MJ-1B-C "Jammer" loader (3D Printed) (1/48)
MJ-1C "Jammer" loader (3D Printed) (1/48)
A-7E "Corsair II" air intakes, wheel bays, landing gears, wheels for Hasegawa kit (3D Printed) (1/48)
A-7D "Corsair II" air intakes, wheel bays, landing gears, wheels for Hasegawa kit (3D Printed) (1/48)
A-7E "Corsair II" air intakes, wheel bays, landing gears, wheels HobbyBoss kit (3D Printed) (1/48)
A-7D "Corsair II" air intakes, wheel bays, landing gears, wheels for HobbyBoss kit (3D Printed) (1/48)
F-111 Triple Plow I Air Intakes for HobbyBoss Kit (3D Printed) (1/48)
F-111 Triple Plow II Air Intakes for HobbyBoss Kit (3D Printed) (1/48)
F-111 Triple Plow I Air Intakes for Academy Kit (3D Printed) (1/48)
F-111 Triple Plow II Air Intakes for Academy Kit (3D Printed) (1/48)
F-111 wheel bay with landing gear for HobbyBoss Kit (3D Printed) (1/48)
F-111 wheel bay with landing gear for Academy Kit (3D Printed) (1/48)
F-111 Bomb bay for HobbyBoss Kit (3D Printed) (1/48)
F-111 Bomb bay for Academy Kit (3D Printed) (1/48)
USAF Outboard pylon for F-4 "Phantom II" C/D/E/G (1/48)
NAVY Outboard pylon for F-4 "Phantom II" B/J/N/S (1/48)
F/A-18 (A/B/C/D) air intakes for Kinetick kit (3D Printed) (1/48)
F/A-18 (A/B/C/D) air intakes for Hasegawa kit (3D Printed) (1/48)
T-38A "Talon" exhaust nozzles for Wolfpack kit (3D Printed) (1/48)
T-38C "Talon ll" exhaust nozzles for Wolfpack kit (3D Printed) (1/48)
Rafale C cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale B cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale M cockpit with 3D decals for Revell/Academy kit (1/48)
Rafale B cockpit with 3D decals for HobbyBoss kit (1/48)
Rafale M cockpit with 3D decals for HobbyBoss kit (1/48)
Rafale C cockpit with 3D decals for HobbyBoss kit (1/48)
A-7E "Corsair II" Cockpit for Hasegawa kit (1/48)
A-7D "Corsair II" Cockpit for Hasegawa kit (1/48)
A-7E "Corsair II" Cockpit for HobbyBoss kit (1/48)
A-7D "Corsair II" Cockpit for HobbyBoss kit (1/48)
F-105 "Thunderchief" Air intakes for Hobby Boss kit (3d Printed) (1/48)
F-105D "Thunderchief" cockpit with 3D decals for Hobby Boss kit (3d Printed) (1/48)
F-105G "Thunderchief" cockpit with 3D decals for Hobby Boss kit (3d Printed) (1/48)
OV-10 (A/C) "Bronco" Cockpit, landing gears, wheels bay and weighted wheels set for ICM kit (3d Printed) (1/48)
OV-10 (D) "Bronco" Cockpit, landing gears, wheels bay and weighted wheels set for ICM kit (3d Printed) (1/48)
OV-10 "Bronco" cargo bay for ICM kit (3d Printed) (1/48)
F/A-18 "Hornet" landing gears with weighted wheels set for Kinetic kit (3D printed) (1/48)
F/A-18 "Hornet" landing gears with weighted wheels set for Hasegawa kit (3D printed) (1/48)
F/A-18 "Hornet" wheels bays for Kinetic kit (3D printed) (1/48)
F/A-18 "Hornet" wheels bays for Hasegawa kit (3D printed) (1/48)
AGM-12B Bullpup-A missiles (2 pcs) (A-4, A-5, A-6, A-7, F-4, F-8, F-100, F-105, P-3 Orion, Sea Vixen, Buccaneer) (1/48)
AGM-12C Bullpup-B missiles (2 pcs) (A-4, A-5, A-6, A-7, F-4, F-8, F-100, F-105, P-3 Orion, Sea Vixen, Buccaneer) (1/48)
F-15 (C/D) "Eagle" late (since 2017 - US only) wheels set (weighted) (1/48)
F-4 "Phantom II" late 370 gallon fuel tanks with pylons (2 pcs) (1/48) (Royal Jet)
F-4 "Phantom II" early 600 gallon fuel tank with pylons (2 pcs) (1/48)
Sea King tail rotor for Airfix kit (3D printed) (1/48)
Sea King folding tail for HAS.1/HAS.5/HU.5 for Airfix kit (3D printed) (1/48)
Sea King folded main rotor with blade fold restraint systems for Airfix kit (3D printed) (1/48)
Sea King unfolded main rotor for Airfix kit (3D printed) (1/48)
Sea King tail rotor for Hasegawa kit (3D printed) (1/48)
Sea King folding tail for Hasegawa kit (3D printed) (1/48)
Sea King folded main rotor with blade fold restraint systems for Hasegawa kit (3D printed) (1/48)
Sea King unfolded main rotor for Hasegawa kit (3D printed) (1/48)
- Tango
- Příspěvky: 55
- Registrován: 18 čer 2013, 21:12
- Bydliště: Liberec
Re: Novinky od ruznych vyrobcu...
Novinkové sady Armycast, které, když to klapne, budou v prodeji již tuto sobotu na Proseku:
Obtiskové sady:
- ACD 48 034 A-4 Skyhawk in the World
- ACD 72 040 A-4 Skyhawk in the World
Obě sady na Skyhawky obsahují obtisky na 20 letounů ze sedmi zemí. Resinové sady:
AC 72059 Mirage 2000-5F upgrade set Kromě toho, díky novému dotisku jsou znovu dostupné následující obtiskové sady:
- ACD 72019 F-5E/F Tiger II
- ACD 72040 IAF AH-64A Apache
- ACD 48008 IAF AH-64A/D Apache
- ACD 48033 Mirage IIIE
Obtiskové sady:
- ACD 48 034 A-4 Skyhawk in the World
- ACD 72 040 A-4 Skyhawk in the World
Obě sady na Skyhawky obsahují obtisky na 20 letounů ze sedmi zemí. Resinové sady:
AC 72059 Mirage 2000-5F upgrade set Kromě toho, díky novému dotisku jsou znovu dostupné následující obtiskové sady:
- ACD 72019 F-5E/F Tiger II
- ACD 72040 IAF AH-64A Apache
- ACD 48008 IAF AH-64A/D Apache
- ACD 48033 Mirage IIIE
- Tango
- Příspěvky: 55
- Registrován: 18 čer 2013, 21:12
- Bydliště: Liberec
Re: Novinky od ruznych vyrobcu...
Novinky Armycast v premiéře na letošním Edayi:
ACD 48036 Mi-17 Czech and Slovak service
(MOC 380 Kč - Eday cena 310 Kč)
ACD 72045 Mi-17 Czech and Slovak service
(MOC 341 Kč - Eday cena 270 Kč)
ACD 48037 Mi-17 Czech stencils - pouze stroje v NATO kamufláži
(MOC 159 Kč - Eday cena 120 Kč)
ACD 72046 Mi-17 Czech stencils - pouze stroje v NATO kamufláži
(MOC 159 Kč - Eday cena 120 Kč)
PUR sady:
AC 72060 Hurricane engine set (Arma Hobby) - na fotkách je ještě původní stav -otevřený pravý bok, nakonec jsme dodělai i levý kryt, motor je možný oddeklovat komplet celý kromě spodního krytu.
(MOC 380 Kč - Eday cena 310 Kč)
AC 72061 Hurricane Mk.I wheel set Fin/RO (Arma Hobby) - podvozkové kryty doplněné o detaily , kola pětiparskový disk, specifická ostruha pro finské/rumunské Hurricany
(MOC 110 Kč - Eday cena 90 Kč)
ACD 48036 Mi-17 Czech and Slovak service
(MOC 380 Kč - Eday cena 310 Kč)
ACD 72045 Mi-17 Czech and Slovak service
(MOC 341 Kč - Eday cena 270 Kč)
ACD 48037 Mi-17 Czech stencils - pouze stroje v NATO kamufláži
(MOC 159 Kč - Eday cena 120 Kč)
ACD 72046 Mi-17 Czech stencils - pouze stroje v NATO kamufláži
(MOC 159 Kč - Eday cena 120 Kč)
PUR sady:
AC 72060 Hurricane engine set (Arma Hobby) - na fotkách je ještě původní stav -otevřený pravý bok, nakonec jsme dodělai i levý kryt, motor je možný oddeklovat komplet celý kromě spodního krytu.
(MOC 380 Kč - Eday cena 310 Kč)
AC 72061 Hurricane Mk.I wheel set Fin/RO (Arma Hobby) - podvozkové kryty doplněné o detaily , kola pětiparskový disk, specifická ostruha pro finské/rumunské Hurricany
(MOC 110 Kč - Eday cena 90 Kč)