MiG-25 RBT 1/48 ICM
- DENIS
- Příspěvky: 6
- Registrován: 14 lis 2020, 10:30
MiG-25 RBT 1/48 ICM
This is my first time here. This is the first model I share on this forum.
The kit is great, but additional kits will still be needed to build this aircraft.
When building the model, the following additional sets were used.
ResKit Wheels.
The resin is of good quality, no bubbles, the division is convenient for painting, it is copied enough, the docking is good. The product does not cause complaints about the quality.
AMIGO nozzles.
Here, in general, aerobatics. I have never seen so many copy nozzles, even BRASSIN is probably inferior. The casting is clean, thin, the parts fit together perfectly, the resin is easy to process, soft, which makes it possible to deform it during operation and does not prick, but you need to be careful as it can also be crumpled or pushed through leaving marks.
ПВД MASTER MODEL.
Очень крутое, копийное и тонкое изделие, как и вся их продукция и аналогов нет.Обязательно к приобретению.
Стекатели статического электричества MASTER MODEL.
Про качество выше написал.Здесь удивляет то, каким образом они смогли выточить их так аккуратно.
В кабину я посадил пилота вместе с креслом от AEROBONUS.
Бедный пилот, намучил я его. Несколько раз перекрашивал, а в завершение пересадил ему голову от другой фигуры, так как ЗШ был другой модели.
Декаль БЕГЕМОТ.
Здесь все всё знают. Качество хорошее, но нумерация это просто жесть.
Так же есть неточности, надо быть внимательным и сверяться с реальными фото. Я допустил кое-какие неточности.
Доработки.
Проводка на стойках, антенна(может и не антенна,не силён в этом вопросе) у кабины из медицинской иглы и бано купленное давным-давно неизвестной фирмы.
Увидев у коллеги фото мятого бака заразился и решил сделать чуть помятый бак.Вмятины делал ножом, а потом всю поверхность выводил наждачкой.
Окраска красками АКАН,Ганза,Тамия,Валехо.
Тонировка пигменты Тамия, OILBRUSHER, карандаши, смывка масло.
You can also see my work on https://www.instagram.com/denisbugakov_scale48/
Naposledy upravil(a) DENIS dne 14 lis 2020, 11:15, celkem upraveno 2 x.
- DENIS
- Příspěvky: 6
- Registrován: 14 lis 2020, 10:30
- DENIS
- Příspěvky: 6
- Registrován: 14 lis 2020, 10:30
- herr66
- Příspěvky: 4416
- Registrován: 12 dub 2012, 09:03
- Kontaktovat uživatele:
Re: MiG-25 RBT 1/48 ICM
Denis, welcome here in this forum.
Excellent job!
Excellent job!
- mess
- Příspěvky: 3074
- Registrován: 11 dub 2012, 12:40
- Bydliště: Pragl city!
- Kontaktovat uživatele:
Re: MiG-25 RBT 1/48 ICM
Hey Denis, welcome!
I agree that your nozzles look much better than original offering, I suppose I will replace mine with MiG-25P I plan to build. And I like your metal interpretation!
Btw, I built the same machine from ICM box (older a little, without oversprayed emblems on intakes). I also used Reskit wheels as they look cool in comparison with plastic ones.
Keep posting
M.
I agree that your nozzles look much better than original offering, I suppose I will replace mine with MiG-25P I plan to build. And I like your metal interpretation!
Btw, I built the same machine from ICM box (older a little, without oversprayed emblems on intakes). I also used Reskit wheels as they look cool in comparison with plastic ones.
Keep posting
M.
Martin Benko, vlastni rukou
KPM Prosek Panthers
KPM Prosek Panthers
- DENIS
- Příspěvky: 6
- Registrován: 14 lis 2020, 10:30
Re: MiG-25 RBT 1/48 ICM
Thank you, guys!
Yes, I also used wheels from ResKit.
Yes, I also used wheels from ResKit.
-
- Příspěvky: 306
- Registrován: 23 úno 2016, 10:20
Re: MiG-25 RBT 1/48 ICM
Very good job!!!
-
- Příspěvky: 269
- Registrován: 09 bře 2014, 20:05
- Bydliště: Liteň
Re: MiG-25 RBT 1/48 ICM
вот красота какая .